eng Islamic Azad University Dental Branch Journal of Research in Dental and Maxillofacial Sciences 2588-4166 2383-2754 2020-05 5 2 1 1 article S Baghery moghadam dr.baqerymoqadam@gmail.com 1 F Mirzaei fatemehmirzaei.ir.1998@gmail.com 2 Assistant professor, Dental Research Center, Golestan University of Medical Sciences Student Research Committee, Golestan University of Medical Sciences, Gorgan, Iran. On 20 January 2020, the World Health Organization (WHO) stated that the outbreak of Coronavirus disease 2019 (COVID-19) is a global concern that poses a high risk for countries like Iran with vulnerable health systems. In Iran, virtual education began a few weeks after the suspension of universities. However, this was difficult for the field of dentistry to achieve as practical courses cover most of the academic semester. In this article, we state the problems among dental schools of Iran during the outbreak of COVID-19. http://jrdms.dentaliau.ac.ir/article-1-274-en.pdf COVID-19 Dental Education Humans eng Islamic Azad University Dental Branch Journal of Research in Dental and Maxillofacial Sciences 2588-4166 2383-2754 2020-05 5 2 2 6 article N Fatahi Vanani navid.fava@gmail.com 1 A Golestaneh drgolestaneh@gmail.com 2 M MalekiGorji mohsen_malekigorji@yahoo.com 3 Dentist Assistant professor, Oral and maxillofacial surgery Dept, Dental school, Islamic Azad University, Isfahan (Khorasgan) branch, Isfahan, Iran Postgraduate student, Oral and maxillofacial surgery Dept, Dental school, Background and Aim: This study aimed to compare the level of pain, wound healing, facial edema, and surgeon’s comfort in surgical extraction of impacted third molars using surgical scalpel versus radiofrequency (RF) incision. Materials and Methods: This split-mouth clinical trial evaluated 41 patients with bilateral impacted third molars in one jaw with the same Pederson difficulty index (between 5 and 7, moderate difficulty). The surgical incision was made using a surgical scalpel on one random side and an RF device on the contralateral side. The level of pain was measured using a numerical rating scale (NRS) 7 days postoperatively. The wound healing was evaluated using the wound evaluation scale (WES) 4 weeks postoperatively. Facial edema was quantified using a tape measure 7 days postoperatively. Surgeon’s comfort was assessed by asking the surgeons regarding the level of easiness of the procedure. The pain score, wound healing score, facial edema, and surgeon’s comfort in surgical extraction of impacted third molars were compared between the two sides using SPSS 22 via paired t-test and McNemar’s test.   Results: The surgeon’s comfort was significantly higher in the use of a surgical scalpel (P<0.001). The difference in pain score (P=0.95), wound healing (P=0.32), and facial edema (P>0.05) was not significant between the two groups. Conclusion: The results of this study showed no significant difference in surgical extraction of impacted third molars using a surgical scalpel or an RF device regarding the level of pain, wound healing, or facial edema. http://jrdms.dentaliau.ac.ir/article-1-267-en.pdf Pain Wound Healing Edema Impacted Tooth Third Molar Tooth Extraction Radiofrequency Therapy eng Islamic Azad University Dental Branch Journal of Research in Dental and Maxillofacial Sciences 2588-4166 2383-2754 2020-05 5 2 7 13 article S Shahbazi 1 N Moezzi ghadim 2 AR Mirzaei 3 A Azizi drarashazizi@yahoo.com 4 Dentist Assistant professor, Oral Medicine Dept, Faculty of Dentistry,Tehran Medical Sciences Educational Trainer at International Academy of RWTH Aachen University, Aachen, Germany Professor,Oral Medicine Dept, Faculty of Dentistry,Tehran Medical Sciences , Islamic Azad University , Tehran, Iran. Background and Aim: Diode laser is a great choice for soft tissue surgery. The diode laser is partially absorbed by hard dental tissues, making it safe for soft tissue surgery. This study aimed to compare the tissue thermal changes induced by three types of diode lasers at 810, 940, and 980nm wavelengths. Materials and Methods: In this in-vitro experimental study, using a diode laser device (continuous mode with a 400μm fiber tip) at each of the 810, 940, and 980nm wavelengths and powers of 1, 2, and 3W in contact mode, incisions with the length of 2cm were made on pieces of meat over a period of 10 seconds. The primary and secondary temperatures were measured using a thermocouple. Data were analyzed using two-way analysis of variance (ANOVA). Results: Tissue temperature changes induced by diode laser at 810nm/3W were significantly greater than that of 2W power. These changes were higher with 2W of power compared to 1W (P<0.05). Temperature changes induced by diode laser at 940nm/2 and 3W were significantly greater than that of 1W power (P<0.05). Temperature changes induced by diode laser at 980nm/3W were significantly greater than that of 2W power. Tissue temperature changes were higher with 2W of power compared to 1W (P<0.05). Conclusion: Diode laser (continuous mode with a 400µm fiber tip) at 3W of power and 980nm wavelength caused the highest rate of thermal changes. The 810nm diode laser with the power of 1W caused the slightest heat changes in the soft tissue.   http://jrdms.dentaliau.ac.ir/article-1-269-en.pdf Diode Laser Temperature Soft Tissue Injuries eng Islamic Azad University Dental Branch Journal of Research in Dental and Maxillofacial Sciences 2588-4166 2383-2754 2020-05 5 2 14 20 article M Asnaashari Mo_Asna12@yahoo.com 1 A Meyari Atieh.Meyari@gmail.com 2 R Hajrezai Reihaneh_rezai@yahoo.com 3 P Paymanpour Payam_Paymanpour@yahoo.com 4 N Behrooz Narges.behrooz1986@gmail.com 5 Professor, Laser Application in Medical Sciences Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran. Postgraduate Student, Department of Restorative and Cosmetic Dentistry,Dental Faculty, Tehran Medical Sciences Assistant Professor, Orthodontics Dept, Dental Faculty, Tehran Medical Sciences Assistant Professor, Department of Endodontics, Shahid Beheshti University of Medical Sciences, Tehran, Iran Postgraduate Student, Department of Restorative and Cosmetic Dentistry, Dental Faculty, Tehran Medical Sciences Background and Aim: Different methods have been proposed for rapid disinfection of gutta-percha (GP) cones. This study aimed to assess the efficacy of low-pressure radiofrequency cold plasma (LRFCP) in disinfection of GP cones compared to three chemical disinfectants. Materials and Methods: Seventy GP cones were allocated to seven groups of 10 each. All samples were initially sterilized with ethylene oxide (EO) and subsequently inoculated with Staphylococcus aureus (S. aureus), except for the negative control group (n=10). In the experimental groups (n=50), samples were subjected to one-minute chemical disinfection [5.25% sodium hypochlorite (NaOCl), 2% chlorhexidine (CHX), and 10% Deconex® 53 PLUS) or LRFCP (30-second or one-minute). The effectiveness of disinfection was evaluated by counting the colony-forming units (CFUs). Data were analyzed using Kruskal-Wallis test (P=0.05). Results: S. aureus was completely eradicated in all groups. LRFCP and 5.25% NaOCl were the most effective agents in disinfection of GP cones. In addition, 2% CHX was significantly weaker than the other agents (P<0.05). Deconex® 53 PLUS (10%) was more potent than 2% CHX; however, the difference between 10% Deconex® 53 PLUS and other experimental groups was not significant (P>0.05).   Conclusion: LRFCP can be assumed as a noninvasive and efficient method for disinfection of GP cones. http://jrdms.dentaliau.ac.ir/article-1-270-en.pdf Disinfection Gutta-Percha Cold Plasma Staphylococcus aureus eng Islamic Azad University Dental Branch Journal of Research in Dental and Maxillofacial Sciences 2588-4166 2383-2754 2020-05 5 2 21 25 article A Fakhari a.fakhari@yahoo.com 1 H Heshmat h_heshmat@yahoo.com 2 M Emami Arjomand mansoureh.emami96@gmail.com 3 SF Tabatabaei farnaztabatabaei96@gmail.com 4 Dentist Associate professor, Restorative Dept and Dental Material Research Center , Faculty of Dentistry, Tehran Medical Sciences Assistant professor, Restorative Dept and Cosmetic Dentistry, Faculty of Dentistry, Tehran Medical Sciences Assistant professor, Department of Restorative and Cosmetic Dentistry ,Semnan University of Medical Sciences, Semnan, Iran Background and Aim: One of the most important problems with composite restorations is the loss of consistency between the composite and tooth color. The present study aimed to compare the color stability of two types of nanohybrid composites cured with different light-curing devices after aging. Materials and Methods: In this study, the color stability of 40 disc-shaped specimens (10 mm in diameter and 2 mm in height) from two types of enamel and dentin nanohybrid composites (IPS Empress Direct, Ivoclar Vivadent) was investigated. A group of 10 samples of each composite was cured by light-emitting diode (LED) Bluephase device (Ivoclar, Vivadent) at 1200 mW/cm2 for 20 seconds, and another group of 10 specimens was cured by a quartz-tungsten-halogen (QTH) device (Coltolux 2.5, Colten, USA) at 600 mW/cm2 for 40 seconds. The initial color of the samples was determined by the Konica Minolta spectrophotometer (CS2000, USA), and then, the composite samples were subjected to an accelerated artificial aging (AAA) process in the QUV/SPRAY device. Then, the color of the samples was reassessed. Two-way analysis of variance (ANOVA) was used to compare the color changes in the study groups at a significance level of P=0.05. Results: The specimens cured by the LED device showed significantly lower color change compared to QTH (P=0.047). However, there was no significant difference in color stability between enamel and dentin composites cured by a fixed apparatus (P=0.474). Conclusion: The curing of nanohybrid composites with LED devices causes lower color change compared to QTH. http://jrdms.dentaliau.ac.ir/article-1-272-en.pdf Aging Composite Resins Dental Curing Light Spectrophotometry eng Islamic Azad University Dental Branch Journal of Research in Dental and Maxillofacial Sciences 2588-4166 2383-2754 2020-05 5 2 26 33 article F Sarkarat 1 SA Vahdati 2 HR Mahaseni aghdam hamidmahaseni@gmail.com 3 Z Nematallahi 4 M Farahmand 5 Associated Prof, Department of Oral and Maxillofacial Surgery and Craniomaxillofacial Research Center, Dental Faculty, Tehran Medical Sciences Doctor of Dental Surgery, Advanced Specialty Education Programs in Endodontics and Implant Dentistry Assistant Prof, Department of Oral and Maxillofacial Surgery and Craniomaxillofacial Research Center, Dental Faculty, Tehran Medical Sciences, Islamic Azad University, Tehran, Iran. Doctor of Dental Surgery, Craniomaxillofacial Research Center, Dental Faculty, Tehran Medical Sciences Postgraduate Student, Department of Orthodontics, Dental Faculty, Tehran Medical Sciences Background and Aim: Autogenous bone grafts are considered the gold standard although they have several disadvantages, leading to a search for suitable alternative graft biomaterials. This study evaluates the histological and histomorphometric properties of regenerated bone in defects in rabbits following the application of two commercially available xenografts (Bio-Oss and Osteon). Materials and Methods: This animal study was carried out on 14 New Zealand rabbit calvaria. Four 6.5-mm critical-size defect (CSD) models of bone regeneration were formed in each surgical site. The first defect was filled with Bio-Oss, the second with large Osteon (L-Osteon), the third with small Osteon (S-Osteon), and the last one remained unfilled (the control group). The cases were sacrificed. Bone forming properties (amount of new bone formation, inflammation, and foreign body reaction) were observed at 4- and 8-week intervals through histological and histomorphometric examinations. The Friedman test, Kruskal-Wallis test, and Wilcoxon test for multiple comparisons were used for data analysis. The level of statistical significance was set at 0.05. Results: There was no statistically significant difference for regenerated bone among the four groups (P>0.05). The L-Osteon site showed more inflammation and foreign body reaction compared to the other groups.  Conclusion: The results of this study showed that Bio-Oss and Osteon appear to be highly biocompatible and osteoconductive and can thus successfully be used as bone substitutes in augmentation procedures. http://jrdms.dentaliau.ac.ir/article-1-271-en.pdf Biocompatible Materials Bio-Oss Bone Grafting Bone Formation Bone Substitutes Histology Osteon eng Islamic Azad University Dental Branch Journal of Research in Dental and Maxillofacial Sciences 2588-4166 2383-2754 2020-05 5 2 34 38 article M Asadi 1 S Farhadi dr.sfarhadi@gmail.com 2 K Gharanizadeh 3 S Tavasoli-Hojjati tavasolisara@yahoo.com 4 S Ghadimi 5 Postgraduate Student, Pediatric Dentistry Dept, Faculty of Dentistry,Tehran Medical Sciences Assistant professor, Oral and Maxillofacial Pathology Dept, Faculty of Dentistry,Tehran Medical Sciences Assistant professor, Oral and Maxillofacial Surgery Dept, Faculty of Dentistry,Tehran Medical Sciences Assistant professor, Pediatric Dentistry Dept, Faculty of Dentistry,Tehran Medical Sciences, Islamic Azad University, Tehran, Iran Associate professor, Laser Research Center of Dentistry, Department of Pediatric Dentistry Background: Radicular cysts are the most frequent odontogenic cysts of the jaws. Radicular cysts arising from the primary teeth are very rare and comprise 0.5% to 3.3% of radicular cysts in both primary and permanent dentitions. Case Presentation: In this paper, we report the clinical, radiographical, and histological characteristics of a radicular cyst associated with a maxillary deciduous first molar. The treatment plan included extraction and enucleation of the cyst under local anesthesia after the elevation of a mucoperiosteal flap, which led to satisfactory and uneventful healing. Conclusion: Early diagnosis of radicular cysts associated with the primary dentition allows for a less aggressive treatment plan and prevents adverse effects on the permanent successor. http://jrdms.dentaliau.ac.ir/article-1-201-en.pdf Radicular Cyst Primary Molar Deciduous Periapical Cyst