1. Gad MM, Fouda SM, Al-Harbi FA, Näpänkangas R, Raustia A. PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition. Int J Nanomedicine 2017;12:3801-12. [
DOI:10.2147/IJN.S130722] [
PMID] [
PMCID]
2. Ghaffari T, Hamedirad F, Ezzati B. In Vitro Comparison of Compressive and Tensile Strengths ofAcrylic Resins Reinforced by Silver Nanoparticles at 2% and 0.2% Concentrations. J Dent Res Dent Clin Dent Prospects 2014 Dec;8(4):204-9.
3. Ellakwa AE, Morsy MA, El-Sheikh AM. Effect of aluminum oxide addition on the flexural strength and thermal diffusivity of heat-polymerized acrylic resin. J Prosthodont 2008 May;17(6):439-44. [
DOI:10.1111/j.1532-849X.2008.00318.x] [
PMID]
4. Jagger DC, Jagger RG, Allen SM, Harrison A. An investigation into the transverse and impact strength of "high strength" denture base acrylic resins. J Oral Rehabil 2002 Mar;29(3):263-7. [
DOI:10.1046/j.1365-2842.2002.00830.x] [
PMID]
5. Hong G, Murata H, Li Y, Sadamori S, Hamada T. Influence of denture cleansers on the color stability of three types of denture base acrylic resin. J Prosthet Dent 2009 Mar;101(3):205-13. [
DOI:10.1016/S0022-3913(09)60032-9]
6. Asli HN, Moradian S, Asli MN. Comparison of transverse strength of three different types of heat cured resin acrylics. Biosci Biotechnol Res Commun 2017;10(2):248-51. [
DOI:10.21786/bbrc/10.2/42]
7. Vallittu PK. Glass fiber reinforcement in repaired acrylic resin removable dentures: preliminary results of a clinical study. Quintessence Int 1997 Jan;28(1):39-44.
8. Beyli MS, von Fraunhofer JA. An analysis of causes of fracture of acrylic resin dentures. J Prosthet Dent 1981 Sep;46(3):238-41. [
DOI:10.1016/0022-3913(81)90206-7]
9. Farmer JB. Preventive prosthodontics: maxillary denture fracture. J Prosthet Dent 1983 Aug;50(2):172-5. [
DOI:10.1016/0022-3913(83)90006-9]
10. Gharechahi J, Asadzadeh N, Shahabian F, Gharechahi M. Flexural strength of acrylic resin denture bases processed by two different methods. J Dent Res Dent Clin Dent Prospects 2014 Sep;8(3):148-52.
11. Hammed MG, Al-Fahdawi IH, Motlak M. Enhancement of the Tensile and the Compression Properties for Heat-Cured Acrylic Resin Denture Base Materials. Baghdad Sci J 2018;15(4):449-54 [
DOI:10.21123/bsj.15.4.449-454]
12. Ersu B, Yuzugullu B, Ruya Yazici A, Canay S. Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments. J Dent 2009 Nov;37(11):848-56. [
DOI:10.1016/j.jdent.2009.06.017] [
PMID]
13. Durkan R, Oyar P. Comparison of mechanical and dynamic mechanical behaviors of different dental resins polymerized by different polymerization techniques. Niger J Clin Pract 2018 Sep;21(9):1144-9.
14. Heidari B, Firouz F, Izadi A, Ahmadvand S, Radan P. Flexural Strength of Cold and Heat Cure Acrylic Resins Reinforced with Different Materials. J Dent (Tehran) 2015 May;12(5):316-23.
15. During IV. Removal of a Fractured Screw Segment From a Dental Implant (Doctoral dissertation, Georgia Regents University).2012.
16. Nejatian T, Sefat F, Johnson T. Impact of packing and processing technique on mechanical properties of acrylic denture base materials. Materials 2015;8(5):2093-109. [
DOI:10.3390/ma8052093] [
PMCID]
17. Hashem M, Alsaleem SO, Assery MK, Abdeslam EB, Vellappally S, Anil S. A comparative study of the mechanical properties of the light-cure and conventional denture base resins. Oral Health Dent Manag 2014 Jun;13(2):311-5.
18. Gharehchahi J, Aghdaee NA, Kermani N. Evaluation of FRC reinforcing on flexural strength of acrylic resin denture bases. N Y State Dent J 2010 Nov;76(6):40-3.
19. Gungor H, Gundogdu M, Alkurt M, Yesil Duymus Z. Effect of polymerization cycles on flexural strengths and microhardness of different denture base materials. Dent Mater J 2017 Jan;36(2):168-173. [
DOI:10.4012/dmj.2016-023] [
PMID]
20. Begum SS, Ajay R, Devaki V, Divya K, Balu K, Kumar PA. Impact Strength and Dimensional Accuracy of Heat-Cure Denture Base Resin Reinforced with ZrO2 Nanoparticles: An in Vitro Study. J Pharm Bioallied Sci 2019 May;11(Suppl 2):S365-S370. [
DOI:10.4103/JPBS.JPBS_36_19] [
PMID] [
PMCID]
21. Al-Dwairi ZN, Tahboub KY, Baba NZ, Goodacre CJ. A Comparison of the Flexural and Impact Strengths and Flexural Modulus of CAD/CAM and Conventional Heat-Cured Polymethyl Methacrylate (PMMA). J Prosthodont 2020 Jun;29(4):341-9. [
DOI:10.1111/jopr.12926] [
PMID]
22. Khan H, Raza M, Khan TA. Comparison of flexural strength of Zinc nanoparticles reinforced resin with conventional heat cure acrylic resin. Pak Oral Dent J 2020; 40(1):51-4.
23. Maheshwari J, Parihar R. A Comparative Evaluation of Impact Strength, Compressive Strength, Tensile Strength, Hardness and Dimensional accuracy of Autopolymerized, Postpolymerized Microwave Exposed Autopolymerized and Heat-Cured Denture Base Resins-An in Vitro Study. Saudi Journal of Oral and Dental Research (SJODR) 2018; 3(5): 164-70.